Print PDF
Favorite
Email
Step 2Operation
The remote controls every operation the RGB lamp.
Remote control channel buttons 1, 2 and 3 pull up R, G and B intensity, buttons 4, 5 and 6 pull down the intensity; Channel up and channel down buttons shuffle through the 10 stored values of R G & B intensity.
You can access directly the preset with the 'volume+' button followed by the preset number (0 to 9). You can store your preferred colour pressing 'volume-' followed by the preset number (0 to 9).
The power on/off button does exactly what you might expect : it turns on and off the lamp.
Remote control channel buttons 1, 2 and 3 pull up R, G and B intensity, buttons 4, 5 and 6 pull down the intensity; Channel up and channel down buttons shuffle through the 10 stored values of R G & B intensity.
You can access directly the preset with the 'volume+' button followed by the preset number (0 to 9). You can store your preferred colour pressing 'volume-' followed by the preset number (0 to 9).
The power on/off button does exactly what you might expect : it turns on and off the lamp.
| « Previous Step | Download PDFView All Steps | Next Step » |
Now, your question. *any* Philips TV remote should work. I tried a few Philips branded as well not branded (i.e. without the official Philips logo on it) and they worked. I also tried a very cheap multi-brand programmable TV remote configured for Philips TVs and it worked too.
It should be easy to find one at any dept.store, do not spend much on it, this adds fun !
Build it and post pictures !
Ciao
5Volt