Print PDF
Favorite
Email
Step 14Snap information
Shown are the tools, and hardware you need to install this snap, with accompanying links for further info and purchase.
I got all my snap supplies from The Tandy Leather factory in town, but they have a great web site: http://www.tandyleatherfactory.com/
Top is the setter
stock number 8058-00
Left is the anvil stock number 8056-00
On the right are the 4 pieces to the snap.
I used "Line 24" black snaps for this belt stock number 1263-03
Make sure you get the right parts of the snaps together. The pieces are lined up here that go together. On the left is the pieces that are what I call the "round" pieces. The upper piece has the rounded bottom, and the lower piece has the gentle rounded outside edge.
The two pieces on the right are what I call the "flat and tall" pieces. The upper one has a flat bottom, a thin edge, and a tall post. The lower one has the thin edge, and is "tall."
I got all my snap supplies from The Tandy Leather factory in town, but they have a great web site: http://www.tandyleatherfactory.com/
Top is the setter
stock number 8058-00
Left is the anvil stock number 8056-00
On the right are the 4 pieces to the snap.
I used "Line 24" black snaps for this belt stock number 1263-03
Make sure you get the right parts of the snaps together. The pieces are lined up here that go together. On the left is the pieces that are what I call the "round" pieces. The upper piece has the rounded bottom, and the lower piece has the gentle rounded outside edge.
The two pieces on the right are what I call the "flat and tall" pieces. The upper one has a flat bottom, a thin edge, and a tall post. The lower one has the thin edge, and is "tall."
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
