Print PDF
Favorite
Email
Step 7Lets gets started making
The first obstacle I noticed was this little guy...
It is just a plastic rivet, that keeps the seat belt buckle from sliding way down out of reach.
I just grabbed a small standard, or flat, screwdriver, stuck it under the edge, being careful to not damage my seat belt webbing. It popped off with just a twist of the handle. There is no hole, it had been installed by pushing the fibers apart. Pretty easy really.
It is just a plastic rivet, that keeps the seat belt buckle from sliding way down out of reach.
I just grabbed a small standard, or flat, screwdriver, stuck it under the edge, being careful to not damage my seat belt webbing. It popped off with just a twist of the handle. There is no hole, it had been installed by pushing the fibers apart. Pretty easy really.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
