loading
Picture of AA battery voltage tester
its an cheap and easy instructable its  fast to make  it will shows how to make this battery tester .
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials and tools

Picture of materials and tools
you will need:
AA battery
paper
aluminium foil
tools:
scissor
hot glue gun
multimeter

Step 2: Print!

Picture of print!
DSC00329.JPG
first you have to print out this drawing to start to make this
fold the blue sides upward.
cut the diagonal lines and fold the tabs (that you have got while you cut the diagonal lines)
to each other. you have to got the shape on the second picture.

Step 3: Connectors

Picture of connectors

now you need the aluminium foil. cut down 2×10cm long pieces.then fold them to 1×1 cm piecies.
then stick them to the and of the shape that you got in the second step.

Step 4: Making the "wires"

Picture of making the
now cut down 2×20 cm pieces from the aluminium  foil then fold hem to thin wires.
after you did it stick them to the connectors 

Step 5: Final touches

Picture of final touches

now stick the whole thing to a carton board. put the multimeter's connector to the wires and put he battery in then turn on the multimeter.



thank you for reading!
ironsmiter4 years ago
looks fun, but why not just place the battery on the table, then touch the probes directly to the battery terminals?
Gernerakos (author)  ironsmiter4 years ago
I know it has no sense but i was boring