Introduction: ADJUSTING BLADE SAW
Happens at Techshop
Working in my istructables and the radio call for help in the wood shop, a member need a DC (?Dream Coach) to adjust the blade saw
Step 1: Yep, the Blade Saw Is Lose
Step 2: Open the Hood???
Step 3: Top and Bottom
Step 4: Spin the Poly and ...
Step 5: ... Put the Saw Back in the Poly
Step 6: Tie the Saw Adjusting the Tension in the Screw
Step 7: Adjust the Poly Angle As Need Too
Step 8: And Done
Close al hoods and start the machine for test before release for members use again.
Done at TECHSHOP
any suggestion to improve the performance of this job?