Avtomat Kalashnikova Rifle Model 1947

Otherwise known as the infamous,

AK-47

Hi everyone, Barrax here, with a little message about a mate of mine called MotaBoi.
This is just an ad for him, and I'd greatly like it if you could subscribe to him.
Here's his page - he's got some great guns coming up, including an M4, that started off as a collaboration between me and him. However we drifted our own ways, and we are now going to post them at the same time.

So, heres his page: >>> https://www.instructables.com/member/MotaBoi/ <<

Updates:
1.0 - Base Gun with no updates and no accessories

About my gun:

Credits to The Dunkis' for the (most excellent) magazine.

Based off of the Ak-47 in Call of Duty 4: Modern Warfare

Stats:

Model: AK-47

Mechanism: FPM over stock

Range: 30-60 depending

Magazine: Dunkis’ STANAG

Pros:

Great looks

Better range than some of my others

Cons:

Complex stock

Broken Y connector L

Pieces Warning: This build may take up a lot of your pieces. It includes a large count of Y connector "Black Hands" Not as many as the ACR, but still a few. Also, this will require 8 half orange connectors and it *might* break a Y connector in the trigger - *might*.

If you can, please take time building this.

I will look forward to seeing your comments.

And last but not least, please comment, rate, comment again, then subscribe :)

Next gun: M4 Carbine. after that, either Desert Eag;e .50AE or Spas12

Step 1: Barrel

Barrel

1 the barrel (and the mag lol) - make
2 make
3 make closeups

Step 2: Trigger, Handle and Back Mag Wall Assembly

Trigger

1 make
2 make
3 make

Pieces...

4 make
5 make (read note)
6 make
7 make
8 make (from another angle)

Handle

9 handle start making
10 make lol notice the grey connecor on one side... put a white rod on yours if you dont want to put the grey on...

Mag well

11 make
12 assemble

Assembly

13 add
14 add sure you put the grey con on the right side.
15 add resting on the white conn
16 add
17 add
18 add, make sure you get the y con the right way round (if yours is broken).

Step 3: The Dunkis' Magazine

1-5 make

Having trouble?

Right click this and open in new tab/window:

https://www.instructables.com/id/Remington-ACR-Adaptive-Combat-Rifle-Knex/step2/The-Dunkis-Magazine/

Step 4: Inner Body + Back Sights

1-4 make, not hard

Step 5: Body Side Panels

1-2 make the side panels

Step 6: Assembly, So Far

1 connect
2 slot this on, but dont take the barrel out
3-7 follow pics

8 what you should have with the mag in

Step 7: Adding to the Body

just follow the pics...

nothing too confusing, apart from pics 3-7 are the same part...

Step 8: Grip

just make it...

blaa

1 is what you should end up with

Step 9: Fore Barrel

make

Step 10: Firing Pin and Assembly

Pin

make

also, get either a bigger elastic, or 2 #64s tied together

dont forget tape

Assembly

3-7 are for the complicated trigger bands

Step 11: * Stock *

This stock is extremely difficult to put together.

You may feel better making your own XD

Nevertheless, if you think you are good enough to make mine, here you go:

Dont let that put you off BTW, its not too hard.

just follow the pics through, slowly...

zoom in if you need help with the rubberbands..

Step 12: Done

Have fun with the AK.

If you're having trouble making it... i'll try and put in some more description, but i dont have it made at the moment...

This will be released at the same time as my M4 Carbine. Please visit that as well, if you haven't already.

lol

have a good time fellow iblesers... Can't wait to see you in the next one :)

Note the M4 has been updated since this picture was last taken

And last but not least, please comment, rate, comment again, then subscribe :)