A gun with amazing power, true trigger and the best part no block!

Step 1: Peices

Picture of Peices

what you'll need

Step 2: The Handle

Picture of The Handle

pic 1- build this
pic 2-back view
pic 3-add flexy rods
pic 4-add second support
pic 5-attach handle
pic 6-attach again

Step 3: The Barrel+ Trigger Mech

Picture of The Barrel+ Trigger Mech

pic 1-barrel preview
pic 2-the front of the barrel
pic 3-middle of barrel
pic 4-end of barrel and the trigger mech
pic 5-the trigger mech
pic 6-

Step 4: Finish+ Ammunition

Picture of Finish+ Ammunition

The ammunition you will need is right in the second pic

Any question please comment.

3rd. pic...just got XD


chazman2 (author)2009-10-23

that is not new and its rubbish

asdfda3432 (author)2009-05-17

Wut does it shoot???

erikos kostarikos (author)2009-05-16

uhh why did you post a pic of a real gun?it dont looks like it and it isnt as tall as the knex gun

knexmaster99 (author)2009-03-15


Miles Tails Prower (author)2009-02-28

Why did you remove the video?

Hugo4123 (author)2008-08-24

its a cool gun but how the heck do you fricken load it

mettaurlover (author)Hugo41232008-09-22

you pull back the rubberband, hook it on the top of the trigger, put in the ammo, and hope it doesn't backfire. VERY painful if it does. ah, the one weakness of this type of gun is that if one joint gets shot out of alignment, the bolt will flip over and hit you in the face.

funguy29467 (author)2008-09-19

i dont get what it shoots?!

deadfire55 (author)2008-07-30

Hey why did you remove your other gun? I was in the middlemof making it could you post it again?

pakman227 (author)deadfire552008-07-30
builder968 (author)2008-07-28

im gonna build a hopper for this

yerjoking (author)2008-07-20

oh yeah, and to answer the question of how to load it, what i did was pull the rubber band back and hook it onto the groove of the grey peg on the trigger, then, put the red rod on a orange connector in the track, and pull it up to the trigger, put the orange connector on the green rod, but do not clip it on, then pull the trigger =]

yerjoking (author)2008-07-19

this has the exact trigger mech as my crossbow lolz, i have now made a rifle, i haven't copied yours, and i don't think you've copied mine, but mine has different ammo, different trigger, and a different handle, i will show pictures in a forum later tonight

adio (author)2008-07-15

how do u load it i won't make it if i don't know how to load it

Oompa-Loompa (author)adio2008-07-18

Looking at it I think you pull the band back and rap it around the bit of trigger sticking out on top of the gun. Put the ammo on the top of the barrel in the groove , then pull the trigger.

The Jamalam (author)2008-07-01

wots your username, cos the guy was called bob 31074

pakman227 (author)The Jamalam2008-07-01

well actually thats not the same gun, I made this on my own...

The Jamalam (author)pakman2272008-07-01

i swear it was the same gun to the last piece

knexguy (author)2008-07-01

Could look MUCH better. Work on it more, put it in a nice body, then we'll see.

The Jamalam (author)2008-07-01

i saw the exact same gun three years ago on youtube.

plasmaspy (author)2008-06-30


Mad Cat (author)2008-06-30


the_burrito_master (author)2008-06-30

yeah its ok but it needs a body and a handle that actually connects to the gun. so work on that then ad it on to the instructable.

dsman195276 (author)2008-06-30

it's ok. it needs some work, like a body.

About This Instructable




More by pakman227:How to play airsoftPakman's Sniper RiflePOWERFUL KNEX RIFLE
Add instructable to: