AP4 K`nex Gun by Oblivitus

Step 5: Loading/Cocking/Firing

Loading:
1: Pull the elastics off of the clip feeder.
2: Pull out the clip feeder and fill the clip with gray one slot, one k`nex rod hole, connectors.
3: Replace the feeder and then the elastic bands.
Cocking:
4: Hold on to the top of the clip with thumb pressed on the second blue rod from the front, on the top supports.
5: Pull back the firing rod pull.
Firing:
6: Press the trigger while gripping the clip with other hand.

Remember that if you fire while there are no rounds remaining in the barrel, the top of the feeder will break because it will get hit with the firing rod.