Everyone has a Bag of Holding these days, but no one has an Apron of Holding. With its multiple ridged pockets always held open to receive, its various soft pockets to hold things close and a glowing natural 20 die to save you in the event of a spring cleaning avalanche; truly this is the batman utility belt of cleaning.

Before reading on, remember to rate me at the end, it lets me know how I'm doing.  And, comments are always welcome and appreciated.  As and artist and maker, its how we learn to grow and broaden our horizons.  If this gets featured in a contest, a vote would be nice too, but that's secondary to the instructable itself.

Ok, a little back history for you non Dungeon & Dragon aficionados. The Bag of Holding was a magical device which enabled you to carry large amounts of treasure in a small bag and it always weighed the same regardless of how much you stuffed in it. Depending on how hard core of a player you were, certain rules were imposed. You couldn’t stuff an infinite amount of items in it, biological tissue placed within it would die after a short amount of time, and often items place within it would become disorganized as you rifled through it. The Apron of Holding may not carry an infinite amount of supplies either, but it does hold them organized for easy retrieval. In addition, the waist belt is actually designed to ride on the hips, dispersing the weight like a back pack rather then it all hanging from the back of your neck. As a result, it feels lighter than it actually is.

Swiss Army Apron
The 4 large pockets on the bottom are held open by a continuous ridged stainless steel tig wire running along the top edge. This allows the pockets to be held open to receive bottles or tools easily. The soft pockets above those are deep enough and varied in size to receive a variety of tools and gadgets. The largest pocket has a snap flap, to keep things securely in place. The 2 D-rings on the side of the belt are great for clipping on a variety of items. The paper towel dispenser outlined later clips on perfectly or for the green approach, simply thread through on some cleaning rags. With snap clips, a feather duster can dangle at the ready, along with whatever else you might need. P.S. The “Swiss Army Apron” was actually my first thought, it was going to be red with white cross symbol, but as I am a dreaded GINGER, it just wouldn’t go with my hair! Sometimes style trumps function after all, lol

Now the Apron of holding doesn’t have to be just used for spring cleaning, it doubles as a great tool apron. The open pockets are like those found on carpenter belts, being made out of heavy weight twill it can take the pounding. How-ever the pockets should be reinforced. The “KEEP-IT-SIMPLE-STUPID”, method to this is to simply cut down a 1 liter yogurt/sour cream container and slip them one into each pocket. Not only will the pockets be now bullet proof to nail or what not, but in theory you could slip out the whole container when swapping items and not have your fingers poked – WIN WIN!

I took it a dinner at a friend’s house and sure enough by the end of the night it was being worn by everyone. Its use was a little more diabolical though, it made a great roving bartender outfit. Bottles of booze and mix were easily held with the hip support belts, and the upper pockets held swizzle sticks and shot glasses.

What other uses could you use it for? Lego belt maybe, mechanics apron, multi-BBQ sauce holding apron perhaps… the list of uses is endless. I have all ready used it while de-soldering a circuit board in the field. The individual pockets allowed for quick sorting of parts coming off the board. Quite handy really.

Check out step #20 for the fun photo shoot, more pics to be added daily as others get in on the fun!

New - video added - Watch Chancey the robo-fish mechanic in action, with a helping hand from the APRON OF HOLDING

Awesome instructable! This makes me wish there was a button to click to vote early for contests that aren't yet closed (or at least to send an email reminder to vote). I definitely don't want to forget to vote for this one!
iminthebathroom (author)  supersoftdrink4 years ago
Thanks thats awesome!
poppa504 months ago

love it, wish I had it 30 years AGO

SparkySolar10 months ago

Thank you for this Instructible.

I like it a lot.


That.was.awesome! I don't know whether to laugh hysterically at myself or not for not only getting the bag of holding reference right away, but not even pausing to think about it. (or about why a 20 sider would be handy)...here's to Geekdom! (I'm a non gaming geek, married to a gaming geek, and have picked up waaaaay too much by osmosis LOL). Seriously great project, though- can't wait to make one- JUST the thing I've been looking for! You rock!
iminthebathroom (author)  domesticdiva3 years ago
Thanks! yeah its funny how many people get the reference right away
Lorddrake3 years ago
Heward would be so proud. :D
Ceiling cat4 years ago
I love the reference! It made me laugh! I was like "Ha ha! That's funny. Wait! Is that a D&D reference?!" Cheers to my fellow nerd! Live long and prosper! You win an internet!
P.S. I've always wanted a bag of holding. Even before I knew what it was. :D
lokiwoman4 years ago
Love it!!!!!
cbg38684 years ago
What a tool belt. I can see it modified for several of my hobbies. These include detailing my Limited Edition 1997 Ford Thunderbird and Stained Glass Artist. You have done a great job. Thanks for the ideas. I will probably not carry quite as much in my apron but I do plan to start on my plans.

By the way, your family is very lucky.
dummy19774 years ago
W.I.F.E. 3.0

mc_ryan4 years ago
First of all, awesome job. Second, I am excitedly refreshed at the use of D&D terminology. ;)
iminthebathroom (author)  mc_ryan4 years ago
Keepin it old school!
gijoebob4 years ago
Very cool project! Very well written and documented. I love the cute and campy photos.
iminthebathroom (author)  gijoebob4 years ago
Thanks, this was a fun one to take pictures of. Still 4 more people want to be shot with it, they'll go up in the next couple days
strongmom114 years ago
I love this! The buckles are ingenius. In order to simplify the sewing, what about using hammer loops of elastic that would exactly hold an empty yogurt container? Or, for greater stability, two strips of fabric in a T, just joined at the three ends ? Those pockets look like they were a real PITA and I know I would skip them myself.
iminthebathroom (author)  strongmom114 years ago
The pockets were a little trying, but worth it as they make the apron. That said, Your ideas sound just as good. The hard part wasn't making the front piece or the attaching ti to the actual apron, it was joining the front piece and the bottom. What would would be perfect & easy is a combo of ideas. Make the front piece like mine, but make it bottomless. Just skip It! When you sew it on, you sew vertically between each pocket anyway, just do it twice. Start the from the top, sew the two rows of stitching close together, then as it descends have the two rows spread apart about an inch. That way you'll introduce a taper, it will hold the plastic containers firmly in place like the elastic bands, yet maintain the illusion of many pockets!
rodolphe4 years ago
Awesome! This is exactly the sort of thing I need when I'm cleaning, moving, makin' stuff etc… And I happen to have some extra fabric handy.
iminthebathroom (author)  rodolphe4 years ago
awesome, I don't know why i didn't make one earlier...
When pinning your curve seam if you will put your pins the other way with the head in the center of the curve makes it easier to pin and to sew. Not critisizing but just something I've learned by trial and error over the years.

Also great apron and will definately be making a few of these, was just thinking about one like this yesterday.
iminthebathroom (author)  nmdispatchlady4 years ago
NO KIDDING, you'd think I'd learn to pin things so it works With the sewing machine, not against, lol
flyingpuppy4 years ago
Well-conceived, and well-written. Will have to make one of these for my gardener sister.
Ronyon4 years ago
I'm an Industrial electrician-your ridged pockets would be just the thing for materials.Well done.
iminthebathroom (author)  Ronyon4 years ago
Thanks, it would be simple to fit plastic bucket inserts of some sort in the pockets. Then when emptying the pockets you would just pull out the inserts, rather then digging with your fingers and impaling your fingers on sharp objects.
rimar20004 years ago
Thanks for sharing, this is very useful!
iminthebathroom (author) 4 years ago
Thanks, there is actually a bit more to it that's coming, add on 2.0
ChrysN4 years ago
Cool, I love the paper towel dispenser, very handy!