I am Jessica Floeh, a Type 1 Diabetic designer working on ways to make the insulin pump into a positive conversation piece and ultimately a fashion statement. I wanted to share with my fellow Type 1's a new way to transform your pump into an accessory.
This tutorial will show you how to make a simple piece inspired by my transformative fashion collection, Hanky Pancreas. The current collection is for women and represents a series of design solutions that better integrate the machine with the body and mind. By turning medical device into fashion accessory the designs intend to alleviate anxiety, create dynamic communities, and encourage new relationships with medical technology.
This tutorial is meant for insulin pumps that have tubing. The design in this tutorial is based around the Medtronic Minimed Pump, however, all the steps can be readjusted according to your own device.
Step 1: Get your tools and materials
What you need:
Insulin pump (obviously)
Sewing machine (or needle & thread)
Hot glue gun
Elastic (I use 1.25" wide)
Fabric flowers, feathers, etc
Step 2: Step 1: Measure your pump
*If you don't have a measuring tape, take some ribbon or even a thin piece of paper and wrap it around, then mark where the two ends meet and lay this down next to a ruler to figure out the measurements.
This pump is 5 and 1/4 inches around.
Step 3: Step 2: Measure and cut your elastic
With your tailor's chalk, mark on your elastic according to your tape measurements and cut.
Step 4: Step 3: Prepare elastic for sewing
Pull the elastic band tightly around your pump.
Mark on both sides with your tailors chalk.
Step 5: Step 4: Sew elastic together
Run the piece through your sewing machine or hand-sew it together.