Accordion-Style Card Wallet

Step 4 Finish Gluing Accordions

Hold down accordions and fold over the cover material on top of them. I used a pencil to add some play in the cover material, to give it some room to expand at the bottom when there are cards inside. The trick here is not to give it too much room or the cards will not be held in the wallet at the bottom by friction.

Inside Gluing: Apply glue to last flap on one side, align with cover and press to apply, repeat with other accordion.

Outside Gluing: Pull last flaps up and over the cover material. Apply glue to each and press in place.

Comments

[siedpe13]

i dont think its merely friction holding the cards; but mechanical compression created through the design of the wallet in addition to friction