Introduction: Acrobat: a Paper Airplane
The Acrobat plane is one that is easy to make, and works every single time. It does all kinds of tricks that a plane could do, and all without any calibration! You just make the plane, give it a toss, and it will spin, dive or flip every single throw. With that said, lets dive right in!
I figured out this plane design when I was randomly folding a paper to try to get a plane, I don't know if this has been made before, and if it has, I am not aware of it and didn't copy off of anything.
Step 1: What You Need.
What do you need to make this plane? Answer: very little. Here is all you need:
A piece of paper. (obviously)
Optional: Ruler and a pencil. (For precision)
And that is all you need, so lets get folding!
Step 2: Folding the Nose
Here is where you will fold the nose. The info boxes should help you if you get stuck, but you shouldn't get stuck cause this plane is very easy to make.
Step 3: Folding the Wings
Here is where you will fold the wings. You can just fold without using a ruler and pencil. It won't be as precise, but it should work just as good with using a ruler. Some instructions for planes tell you to try to get the wings lined up as close as you can, but with this plane you don't need to. Try to get it close, but if it is off it usually works the same as good.
Step 4: You Are Done!
There you have it! A great plane that is one of the best at tricks. Enjoy your amazing plane!
Please favorite, comment, vote, and subscribe for more great projects!