Acrylic Guitar LED mod


Step 2: Switch Placement

Since the battery compartment is in an awkward place for swithing the LEDs on/off another switch has to be added. So, I decided put the switch beside the pickup selector and the volume knobs.

A hole was marked and drilled out and the edges filed down in the scratchplate of the guitar
Remove these adsRemove these ads by Signing Up

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!