Print PDF
Favorite
Email
Step 3Bag it
The purpose of the vacuum press is to apply and even pressure to all surfaces. I set the contraption to draw around 20Hg. Depending on ambient temperature the resin will cure in anythign from 4 to 10 hours.
Once cured I cut the tread and peel back the release fabric which takes the breather fabric containing the excess resin off too.
Once cured I cut the tread and peel back the release fabric which takes the breather fabric containing the excess resin off too.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
