Print PDF
Favorite
Email
Step 4Take out the 4GB micro drive.
This step is pretty easy.
There is tape that is holding the micro drive to the circuit board, so all you have to do is take the tape off, and the micro drive will be dangling.
It is connected to (I think) 32 pins, so just disconnect the drive from those pins. It is relatively easy, but do it carefully because there is risk of bending the pins, or pulling something out of its socket.
There is tape that is holding the micro drive to the circuit board, so all you have to do is take the tape off, and the micro drive will be dangling.
It is connected to (I think) 32 pins, so just disconnect the drive from those pins. It is relatively easy, but do it carefully because there is risk of bending the pins, or pulling something out of its socket.
- In case you do not know the drive I am talking about, it is the big white square, that says "4GB" on it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
