Print PDF
Favorite
Email
Step 4Test the cable and install the drivers.
plug the cable in to the phone, and connect it to a computer through a usb hub
if it works, your phone will be charging and the computer will recognize it and ask for drivers, just hit cancel. if the phone says it's charging, but the pc says "usb device not recognized/failed" swap pins 10 and 15 (the data pins) and try again.
now install the enclosed driver(s) and plug the phone in again.
this time, when it asks for drivers, click "install drivers automatically." it will (should) ask three times. (as in for three separate devices) all three 'devices' (really just separate features) must be working. Now you can tape up the wires and reassemble the connector. (be sure to secure the cord or it will pull the pins out)
if it works, your phone will be charging and the computer will recognize it and ask for drivers, just hit cancel. if the phone says it's charging, but the pc says "usb device not recognized/failed" swap pins 10 and 15 (the data pins) and try again.
now install the enclosed driver(s) and plug the phone in again.
this time, when it asks for drivers, click "install drivers automatically." it will (should) ask three times. (as in for three separate devices) all three 'devices' (really just separate features) must be working. Now you can tape up the wires and reassemble the connector. (be sure to secure the cord or it will pull the pins out)
LG4USB.zip1 MB| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
