Picture of Add some flavor to your USB drive
I recently got a Sandisk Cruzer Micro USB drive and was disappointed to see that a lot of people have the same one at school.
As far as I know they only come in black and since so many people had the same one as me I wanted to be able to separate mine from everyone else's.
While I was trying to think of ways to do it, the guy in front of me threw his gum wrapper on the floor. I slipped my USB drive in and it was a perfect fit!

Since i've done this everyone that has seen it has loved it.

So add some flavor to your USB drive.
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
The things you will need to do this are:

1) 5 pack of gum
2) SanDisk Cruzer Micro USB drive (or any other drive of similar size)
3) Knife or scissors
4) Tape

Step 2: Cut the gum wrapper to size

Picture of Cut the gum wrapper to size
(The blue is the old one that I did, and was already cut.)
Cut the gum wrapper so that the USB drive fits perfectly inside.

After doing that cut a small hole in one of the corners so you can connect it to the key ring.

Step 3: Cut a space for the slider

Picture of Cut a space for the slider
Using an exacto knife or scissors make a small square hole in the side of the gum wrapper so that you are able to retract the connector.

Step 4: Secure it.

Picture of Secure it.
If you have double sided tape stick it along the inside of the gum wrapper opposite the side with the hole for the slider.
The tape is just so the wrapper doesn't slip off accidentally.
If you don't have double sided tape just use regular tape folded over.

That's pretty much it, you'd be surprised how many people actually think you have a stick of gum on your keychain!

If you have any ideas, suggestions, or questions let me know in the comments.
cornealcard4 years ago
make a cap
cornealcard4 years ago
is that metal or paper
FuyuKitsune6 years ago
OMGLOL awesome! I can hide my U3 from my computer-lab teacher now :)
fwjs286 years ago
OMG!!!!WHY DIDNT I THINK OF THAT *chucks flash drive into wall*
monkeyzach6 years ago
i made the same thing two weeks ago!!! same thumb drivee but spearmint gumwraper instead of that
ultrauber7 years ago
i would use hot glue instead of tape. it holds a lot better.
cool! ultrauber7 years ago
Max, although I agree with you, telling people not to you use tape when you have been in possession of a hot glue gun for aprox. an hour, and used tape for your USB drive mods, well, I just find that a little funny.
ultrauber cool!7 years ago
uh...i use hot glue for all my mods, and i've only had the new hot glue for an hour. the other one (it's an ace mini ace, which is totally awesome, btw) i've had for like 10000000000000 years.
cool! ultrauber7 years ago
Oh... sorry. I didn't know you had another one at your mom's house.
Tomonainc7 years ago
I think it would be helpful to finish it off with a wrap of clear packaging tape to protect the wrapper.
god i didn't know this was here I did this before and recently put it in my flash drive savers instructable... sorry for overlapping
ongissim8 years ago
You should do this with the excess Big Red gum.