Step 7: Final Product

Here's the results:
<p>Great Instructable. I made something similar in a <a href="http://www.instructables.com/id/Lego-Octopus-LED-Light/" rel="nofollow">Lego Octopus</a>, your 'ible was the closest I could find (after the fact). </p>
Correct me if I'm wrong but isn't it illegal in ALL states to have any red lights facing the front? Not that thats going to stop me from doing it ; ). One of the dogs came on a pickup i just bought.
well they say that its illegal because that it would signify a taillight, but i think that people will see 2 bright white headlights before they see 2 little red lights. especially through their car mirror. he should be ok, and unless you look closely in the mirror, its more of a close up decoration than a far away one.
wowsers, i didnt realize that. hmmmm..... well, i was thinking of modifying the led's to blink the left eye when turning left and the right one when turning right. what colors would look equally bad-ass as red led's on a red jeep. i guess white led's would look decent., orange is too close to red
If you drive fast enough, the red will appear green because of the doppler effect, You just need a bit less then 15% lightspeed for that or 45.000 kilometers per second. You see, that red aint a problem if your car gots enough horses.
do you sell the mac dog with red led eyes if so let me know i would like to purchase. bigedvan@hughes.net
Orange is perfectly fine to have on the front, look at your front blinkers for example, but i think you should be fine I'd just leave them until you get pulled over for it. At worst you would get an actual written warning.
Been meaning to put a mack dog on my renix cherokee for quite a while now. Nice jeep. :p
NIce, i replaced the led's a while back for brighter ones. i should post them once finals end
Sweet! Arf!
An anecdote. My grandfather used to say (living in Idaho) "It's cold enough to freeze the balls off a brass bulldog!". A few years back my dad acquired a Mack bulldog, so we sent it to the shop for a copper dip (brass dip isn't what you think it is) for Fathers' Day. They tried to sandblast the chrome off and found the sand blew through the pot metal the dog was made of... They acquired a replacement, bead blasted instead, dipped it in copper, and threw in a nice custom wood base (for our time and trouble). It sat on Dad's desk a year or so, then the house burned down... I like this, the led eyes are pretty cool. Forgive me for not wanting a Mack bulldog near my house ever again :)
that would be stolen so fast, but wait. why not put a 50,000 volt charge through it. aka ( a flyback transformer) I'm stupid enough to know
That's pretty cool. Definitely one I'll keep in mind for my next beater. If you want to get the noise down inside your jeep, try insulating the hood. There are specific materials (sort of like a blanket with a sticky back) that will really cut down on the noise at highway speeds. Check with your local auto supply house (or a junkyard) and pick some up. It's fireproof and all that good stuff.
xD thats awesome!!! when i get a car im gona do this with something lol but il have to weld it down cause someone from my school would probably try to jack it . thats a great instructable!
thanks for the comment! the bulldog is held in place by a 5/8 inch threaded bolt, you probably don't need to weld it (it also is aluminum, so welding aluminum to steel would be a pain), but if your going to buy one, check your local scrap yard, they normally can order the parts or find it for you a lot cheaper than they would be available online. -Dane
That's awesome, I love crazy stuff like this. Funny part was the 2nd to last picture. "On the hood." haha.

About This Instructable


28 favorites


Bio: Im a Student at RPI in Troy NY. The best part of college is most definatley 'Spelunking' or dumpster diving for parts in the elctrical ... More »
More by Emperor Dane: Makerspace Power Tool Upgrade: NiMh to Lithium Iron Phosphate Casting a Nyan-Cat Cake Mold: From Design to Aluminum Deliciousness Mod Film for use in super old cameras (620 film)
Add instructable to: