Print PDF
Favorite
Email
Step 6A quick test, and...
SUCCESS!
The green wires from the Light Sensor is left unconnected.
A 'feature' of this circuit is that once on, it will not be 'distracted' by flashes of light, from passing cars etc.
Here's another approach to make your garden light more effective - by adding Bling to the Oomph!
If you like this, see other LED ideas on my website: http://Quantsuff.com
The green wires from the Light Sensor is left unconnected.
A 'feature' of this circuit is that once on, it will not be 'distracted' by flashes of light, from passing cars etc.
Here's another approach to make your garden light more effective - by adding Bling to the Oomph!
If you like this, see other LED ideas on my website: http://Quantsuff.com
| « Previous Step | Download PDFView All Steps | Next Step » |
3
comments
|
Add Comment
|
Sep 25, 2009. 12:18 PMpteranosaur
says:
So radically convenient-totally understand-cell repl sensor by input reduction-GREAT ! Thanks...
Reply
Sep 25, 2009. 11:29 AMpteranosaur
says:
Is sensor connected after testing,or ...
Reply
22
Sep 25, 2009. 11:36 AM
qs (author)
says:
qs (author)
says:
The sensor is not needed since the circuit actually measures output from the Solar cell, and only turns on when there is less than 0.3v output, which is deep twilight, before turning itself on.
Reply
 |
Add Comment
|
