Print PDF
Favorite
Email
Step 3Install the drawer
A spacer made out of wood need to be built to attach the rear end of the drawer rails, then the drawer rails need to be installed.
The drawer with the rails attached was held in place then traced. This was to make sure that the top of the drawer was at the right height. The rails were then removed from drawer, and held against the outline for the drill holes to be traced.
Once traced they were drilled, doing the front first then the rear. The rails were then screwed in place using the screws provided by Ikea.
The drawer with the rails attached was held in place then traced. This was to make sure that the top of the drawer was at the right height. The rails were then removed from drawer, and held against the outline for the drill holes to be traced.
Once traced they were drilled, doing the front first then the rear. The rails were then screwed in place using the screws provided by Ikea.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
