Print PDF
Favorite
Email
This is a basic explanation of how to make an Adirondack chair. They aren't too hard to make if you have the right tools and some woodworking experience. You need:
5-6 5/4 (1-1/4)x6" pressure treated deck planking
1-5/8" #7 trim screws
Total About $40
If you have any questions feel free to ask and i will get back to you ASAP.
Epilog challenge:
If i had the laser cutter i would use it for better metalworking, cut pcb's, i would let my friends/family use it, i could engrave gifts for people, and cut paper for school projects and other crafts.
5-6 5/4 (1-1/4)x6" pressure treated deck planking
1-5/8" #7 trim screws
Total About $40
If you have any questions feel free to ask and i will get back to you ASAP.
Epilog challenge:
If i had the laser cutter i would use it for better metalworking, cut pcb's, i would let my friends/family use it, i could engrave gifts for people, and cut paper for school projects and other crafts.
Remove these ads by
Signing Up| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
15
Oct 6, 2011. 12:18 PM
zazenergy
says:
zazenergy
says:
wow, this is a really cool idea. I think you should turn this into a step by step instructable and detail all the steps. I think our community would really benefit from your expertise!
Reply
4
Oct 7, 2011. 4:52 PMtim127 (author)
says:
Thank you, i was going to make a step by step but i lost a lot of the pics of it being made. What is here is all of what i could get on.
Reply
 |
Add Comment
|
