Step 1: What you need
2 2"x2" wooden blocks
12 anchors for plastic piping
3 plastic pipes 3feet long (depending how tall you want the hoop to be)
Back plate for the hoop, with hoop. (I'll let you know my cheap way of making it)
Step 2: Let's start!
Step 3: The foot
-"click" the pipes into the anchors.
Step 4: The hoop part
-"click" the pipes into the anchors, at desired height.
Step 5: The hoop w/backplate
-Drill 2 holes in a wooden board at a good size (mine was a bit bigger than 1x1 foot)
-Stick the wire in the wholes so you have a couple of inches sticking out at the back.
-Bend the wire at the back and drive a nail through each of the ends of the wire,
attaching the wirer to the hoop plate.
-Bend the wirer to desired shape.
Have a look at the pictures for better understanding.