Step 3: Connecting lead bike
9) knock collars out of both ends of head tube with hammer
10) cut off upper half of head tube to use as a spacer on the seat post to lift connector high enough to clear the rear tire if needed
11) remove seat post of lead bike
12) slip spacer and head tube onto seat post
13) reattach seat post to bike
10) cut off upper half of head tube to use as a spacer on the seat post to lift connector high enough to clear the rear tire if needed
11) remove seat post of lead bike
12) slip spacer and head tube onto seat post
13) reattach seat post to bike
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
