With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This instructable is how to change a gear shift knob the heavy duty way, but be able to change to a different gear shift knob or easily remove this on...
The first step is to remove the old shift knob. Once you find the thread pattern of the factory shifter buy 2 nuts that will fit on the shifter from ...
Grind down the second nut until it fits inside your shift knob of choice. It will look like a ring once you are finished. Remember to wear your PPE...
After grinding the nut down, mix some JB Weld and apply it all over the outside of the nut and on the inside of your shift knob of choice. Make sure y...
This was my shift knob of choice which I picked up at Autozone. I will have to be honest and say that this was an "Impulse Buy" and if I had to buy t...
In this picture I have added the JB Weld to the nut and on the inside of the shift knob. I inserted the nut into the bottom of the shift knob. It fit ...
Once the JB Weld is dry, screw the shift knob onto the shifter as far as you can go. Adjust the shift knob so it looks straight and even then tighten ...
I have been shifting with this shift knob for about a year now and it has not been loose or wobbily once. I don't do any "Fast & Furious" driving, bu...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »