Step 3: Base Coat
This is the background color of your airport. I used white, but any color would be fine. The one I used at work had a green background. Really, it's up to you.
Just paint over the whole table, we'll paint the runway/taxiways over the top of it. I put a little over two coats of white on the table to make sure we couldn't see the wood grain beneath. Save a bit of paint to touch up the background after the runway is painted on. You know, just in case.
Stay well ventilated, and use eye protection if you choose to strip an existing finish off!
Just paint over the whole table, we'll paint the runway/taxiways over the top of it. I put a little over two coats of white on the table to make sure we couldn't see the wood grain beneath. Save a bit of paint to touch up the background after the runway is painted on. You know, just in case.
Stay well ventilated, and use eye protection if you choose to strip an existing finish off!
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
