Picture of Airbrush

Step 1: Snout

Picture of snout
bestplayer1 2008-01-10 18-01-32-54.jpg
bestplayer1 2008-01-10 18-01-34-79.jpg
cut cnout from old bootle
1-40 of 115Next »
jwgottabass10 months ago

Awesome idea, have you done any complicated or involved projects with it we could maybe see a picture of? I would love to see what it's capabilities really are. But regardless, great work, and thanks for taking the time.

what a bout a air pump from a fish tank
DEE54193 years ago
could you use it on skin. for tanning?
MarkWarwick7 years ago
What kind of paint do you use with the air-brush? Sorry if that's mentioned somewhere else, I didn't see it.
msolek (author)  MarkWarwick7 years ago
water paint
rug msolek4 years ago
can u use others?
People tend to use watered-down acrylic paint (so it's the roughly the consistency of ink). Actually they don't water it down (although you could, and I do in my cheap airbrush) - they use paint thinner. Any paint should do as long as it's thin enough.
Never use paint thinner for acrylic, or other water-based, paints. Use only airbrush medium or water. There are also recipes for water-based thinners on the net if you want to whip up a batch.

I've always used water, but I'd heard that there were acrylic thinners you can buy. Never bothered myself because water's worked fine
budforum4 years ago
Hey, since you made this airbrush, and basically inspired me to design my own. Could you take a look at my airbrush and tell me what you think?
were did u get the tubes
sk8rforlife5 years ago
can you get the tubes seperate?
sk8rforlife5 years ago
This airbrush is awesome great job on it. I have one question. What paint do you use?
ghicken7 years ago
Instead of blowing on the end couldn't you attach a aquarium air pump to it?
that would work. a steady stream of air. and get those sprayers that have the mist, off, and steam settings to control the amount of paint. to make it even better you could add a throttle to the aquarium pump to control how much air is going through
yeah a throttle will only cost abou $0.1
you could just hook an old light dimmer switch up to the aquarium pump to regulate the amount of power it puts out. i would also like to put something in that makes it so that you dont need to turn it off all the time just to stop painting... maybe you could put a valve on the airhose that would let the air flow out when you were not holding the paint trigger...
or you can just use a small plastice valve found at pet shops to regulate the air output. It would cost less and be less bulky, it can be built into the air brush. As for a trigger you can always use a air gun. A air gun could in turn eliminate the need for a valve because itself is one :)
ilpug5 years ago
i will definetely try this, but just make it in standard sizes with some threaded parts to improve custimization. i have a small battery powered air pump that i bought at a junk shop for a buck. would work great for this. my mom wont let me buy one, but she will probably not care if i make one
nice one!
Neurotiker5 years ago
You're my hero.
scotty51085 years ago
i like the idea but i'm still not very sure i know how to make this

13005196 years ago
what are those two tubes? where did they come from?
i used tubes from a filter for a fishh tank
joezero6 years ago
This is like the little ones bought for model painting with the canned air. Testor I think is the name. A bicycle tire made for a great air supply for those and probably would for this too.
sk8erdude6 years ago
Ahh! i made 1 and it was awesome until thr pressure built up and the cap flew off and my face was painted red all day i looked like a homocidal maniac!!! LOL JK it's Awesome!
wow that sounds like a good day
xadevox6 years ago
i made one and it works fine with an air compresser
abc123abc6 years ago
what type of paint? where can i buy it? i know a store but wat store
abc123abc6 years ago
wat type of paint and where to buy it
Islmi6 years ago
I'm surprised I'm the first to comment. This is wonderful.
Magic Wade6 years ago
This is awesome. Brilliant.
how dose this compare to "blow pens" referring to quality
they are pretty much the same depnding on how good u made yours
If you are referring to one powered by a person's lungs, the results from an airbrush would be more consistent, since it would depend on pressure supplied by a machine.
existing6 years ago
Could you hook this up to an aquarium pump?
meddler6 years ago
I found a bunch of old fishing baits at a rummage sale that need to be repainted. I didn't want to spend money I really don't have on an airbrush. This might serve very well. I will build this and try it out.
gunnyhanson6 years ago
Anybody serious at all about airbrushing would start with a mid-price actual airbrush and a compressor. This video didn't show him doing anything but splattering paint on a sheet or something.
i would like to see you do better i like it 'cuz it is so damn creative...
Kaiven6 years ago
This would be perfect for the small things that I build!
1-40 of 115Next »