Print PDF
Favorite
Email
Step 2(Optional) Make templates
These templates will make it easier to mark your fabric and vinyl. You can use these templates to maximize the use of your fabric.
1) Back cover: 4.5" x 9.25"
2) Inner pocket: 3.5" x 8.25"/5" (see picture for slant)
3) Outer ID pocket: 3.5" x 2.75"
4) Inner credit card pocket: 2.5" x 4.5"
I used an empty Diet Coke case for the cardboard to make these templates.
On the 3) Outer ID pocket template, mark (but do not cut) a semi-circle off set by 0.25". This provides access to the ID. The offset is because one side of this pocket will be covered by the binding tape.
1) Back cover: 4.5" x 9.25"
2) Inner pocket: 3.5" x 8.25"/5" (see picture for slant)
3) Outer ID pocket: 3.5" x 2.75"
4) Inner credit card pocket: 2.5" x 4.5"
I used an empty Diet Coke case for the cardboard to make these templates.
On the 3) Outer ID pocket template, mark (but do not cut) a semi-circle off set by 0.25". This provides access to the ID. The offset is because one side of this pocket will be covered by the binding tape.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
