Print PDF
Favorite
Email
Step 6Finish Front Cover
This step will finish the front vinyl cover. Sequencing is important since you could sew the inner pocket closed making the project useless.
1) Align the Outer ID pocket at the lower right corner of the front cover. This pocket is on the outside. In the picture it is on top.
2) Sew down the left side of the Outer ID Pocket. Remember to lock the stitches at the top of the pocket.
3) Align the Inner Pocket to the same lower corner of the front cover, but on the inside. The picture below has the pocket on top. Place the long edge along the outer edge of the front cover as indicated in the picture.
4) Stitch down the outer edge and bottom of this pocket.
1) Align the Outer ID pocket at the lower right corner of the front cover. This pocket is on the outside. In the picture it is on top.
2) Sew down the left side of the Outer ID Pocket. Remember to lock the stitches at the top of the pocket.
3) Align the Inner Pocket to the same lower corner of the front cover, but on the inside. The picture below has the pocket on top. Place the long edge along the outer edge of the front cover as indicated in the picture.
4) Stitch down the outer edge and bottom of this pocket.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
