Print PDF
Favorite
Email
Step 9Final Assemby
- Align the inside pocket so the left edge is flush with the seam between the front and back covers.
- Stitch the top, right, and bottom of the inside pocket to the back cover. The right side of the inside pocket will extend off the edge of the back cover.
- Trim excess
This is a good time to clean up all of the edges of the project. If you did not get some of the parts aligned well, trim them down. This creates smooth edges that are easier to bind and cover the assembly stitches.
- Stitch the top, right, and bottom of the inside pocket to the back cover. The right side of the inside pocket will extend off the edge of the back cover.
- Trim excess
This is a good time to clean up all of the edges of the project. If you did not get some of the parts aligned well, trim them down. This creates smooth edges that are easier to bind and cover the assembly stitches.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
