3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

Cool Airsoft Grenade

Cool Airsoft Grenade
OK, this is my first instructable and i hope you will like it. In this instructable you will learn how to make an effective airsoft grenade WITHOUT firecrackers or explosives.
 
Remove these adsRemove these ads by Signing Up
 

Step 1Materials

Materials

To make this instructable you won't need many materials. All you need is a small/large plastic egg, baking soda, vineger, a sandwhich plastic bag, airsoft bb's, and small ballon.

« Previous StepDownload PDFView All StepsNext Step »
6 comments
Jan 19, 2012. 4:35 PMkenttin says:
but why would you want it to explode in mid-air instead of on impact?
Jan 19, 2012. 4:32 PMkenttin says:
awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
May 25, 2011. 7:09 PMairsoftman123 says:
hey if you want to make it better try this what you want to do is get some eletrical tape and a drill or somthing you can make a clean hole in the egg with you also need a pin what you do is you make a hole on the top of the egg and you put the pin in so it goes all the way through when you do that you then put the baking soda in and make sure that the hole you drilled is basiccaly the same diameter as the pin so the baking soda doesnt come out when you put the plastic wrap over the baking soda poke a small hole in the saran wrap or plastic wrap and put the pin trough then seal it together with the eletrical tape make sure nothing leaks through the warp after it is sealed to make sure put some water on it to see if the baking soda is wet if not you are good then bend the end of the pin that is through the plastic wrap carefully this is really important because you dont want to make it leak and you want it to rip/ tear/ pull the plastic wrap apart after that all you do is put the bbs and the viniger in do this over a sink or out side dont make a mess put it together carefully then wrap the part of the egg that makes it 2 peices with tape this diffrence will pop the ballon give you at least 5 seconds and works like hand sanatizer 99.999999999999% of the time and also it is twice the bang makes a loud noise and it goes alot harder and hurts more it can explode on impact but not because of it breaking just exploding...


if you want i can make a tutorial on this one just send me a message and good job with this tutorial.
Aug 1, 2011. 3:40 PMzanki_kitsune says:
but wont the pressure leak out through the hole where the pin came from?
Nov 5, 2011. 6:39 PMflamethrower1010 says:
The pressure will build fast enough so that the pinhole is insignificant.

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
3
Followers
3
Author:inventorguy789