Instructables

Airsoft Mag-Pulls (Magpul)

Today I'm going to show you how to make magazine pull assists (magpuls). These "Magpuls" are originally created by a company ironically named "Magpul", and were designed for military use. Their purpose is to make it easier to pull a magazine from a pouch. The real steal magpuls the military uses, are made out of high grade rubber and plastic. The ones I show you, are made from only house-hold materials. 

Edit: I'm doing another tutorial, Subscribe to me for sneak peaks on my projects.

-Thanks alot guys!

 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
Again, I'm not showing you how to make the rubber ones, These are made of household materials.

Materials:

Duct Tape (Preferably Black)

Magazine For Your Weapon


Tools:

Scissors

Step 2: Tape Pull

Picture of Tape Pull
IMG_0189.JPG
IMG_0190.JPG
Cut a piece of tape about 5 inches long, and then cut it in half long-ways.

Step 3: Tape Trim

Picture of Tape Trim
IMG_0190.JPG
Cut 2 inches off of one of the pieces of tape you have.

Step 4: Stuck Together

Picture of Stuck Together
IMG_0193.JPG
Apply the smaller piece of tape in the center of the longer piece so it looks like so.

Step 5: Bonding

Picture of Bonding
IMG_0195.JPG
Apply piece of tape to magazine as seen below.

Step 6: More Tape

Picture of More Tape
IMG_0197.JPG
IMG_0198.JPG
IMG_0199.JPG
Cut another, longer piece of tape, about 10 inches long, and apply around bottom of mag.

Step 7: Complete!

Picture of Complete!
IMG_0201.JPG
You have finished your first magpul. You can continue to do this for all your mags, Or just leave this one how it is.

Remember: These are for functionality, Not for looks.

Alright, Well I hope my first instructable is a big hit in the airsoft scene.

-Planetmuncher

BrianKT4 years ago
 The bad thing about making tape or string Magpuls is that the "loop" sometimes may fold in on itself, making it hard to pull from a tactical vest or mag pouch. The real Magpuls can be bought for like $3 and actually are like rubber, so can stay sort of rigid in your mag pouches. But good Instructable with nice pictures.
ilpug BrianKT2 years ago
TO combat the collapsing loop problem on these home made magpuls, get a pipe cleaner, or paper clip, or scrap of wire, and build it into the loop so it is more rigid.
planetmuncher (author)  BrianKT4 years ago
I agree, And I got a new MOLLE vest, which is kinda hard to pull out without magpuls.
I've just made some of these for my G36C, shotgun and M16.......
and i have to say they work a treat , ive got a STEYR AUG phantom on the way - should be here tomorow hopefully , will be making one of these for that too - far better than having to buy one , which can be arquad in the UK cause hardly anyone sells them +_+
great instructable, very easy to follow!
Smasher5553 years ago
Hey man, can these work for a sniper rifle where the mag goes completely in the gun? If so, can you tell me how?
Hitman2273 years ago
Very nice and simple.
chuck9993 years ago
I know this kid and hes pretty cool
Finally, an airsoft Instructable that isn't a turd! *cough*guides*cough*

read my guide? go read it and then see the exception to the rule
Thank you for helping me prove my point.
Oh snap!
Robot Lover4 years ago
You Can't use the kitchen scissors, thos go in the kitchen!
okoshima4 years ago
lol hicaps, most airsofters use the real steel version or use a combination of zip tie, paracord and a screwdriver.

the duct tape version is long gone from use by all but new players, and rarely seen on hicaps for obvious reasons
planetmuncher (author)  okoshima4 years ago
I got 3 hicaps from when I bought the gun, The guys at the store gave me some free stuff.