Airsoft Mag-Pulls (Magpul) by planetmuncher
IMG_0186.JPG
IMG_0197.JPG
IMG_0187.JPG
IMG_0188.JPG
IMG_0189.JPG
IMG_0190.JPG
IMG_0191.JPG
IMG_0192.JPG
IMG_0193.JPG
IMG_0194.JPG
IMG_0195.JPG
IMG_0200.JPG
IMG_0199.JPG
IMG_0186.JPG
Today I'm going to show you how to make magazine pull assists (magpuls). These "Magpuls" are originally created by a company ironically named "Magpul", and were designed for military use. Their purpose is to make it easier to pull a magazine from a pouch. The real steal magpuls the military uses, are made out of high grade rubber and plastic. The ones I show you, are made from only house-hold materials. 

Edit: I'm doing another tutorial, Subscribe to me for sneak peaks on my projects.

-Thanks alot guys!

 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

IMG_0187.JPG
Again, I'm not showing you how to make the rubber ones, These are made of household materials.

Materials:

Duct Tape (Preferably Black)

Magazine For Your Weapon


Tools:

Scissors

TechnoGeek95 says: Dec 29, 2009. 9:16 PM
 The bad thing about making tape or string Magpuls is that the "loop" sometimes may fold in on itself, making it hard to pull from a tactical vest or mag pouch. The real Magpuls can be bought for like $3 and actually are like rubber, so can stay sort of rigid in your mag pouches. But good Instructable with nice pictures.
ilpug says: May 8, 2012. 12:41 PM
TO combat the collapsing loop problem on these home made magpuls, get a pipe cleaner, or paper clip, or scrap of wire, and build it into the loop so it is more rigid.
planetmuncher (author) says: Jan 10, 2010. 10:22 PM
I agree, And I got a new MOLLE vest, which is kinda hard to pull out without magpuls.
jabbathegut1 says: Apr 8, 2011. 2:36 AM
I've just made some of these for my G36C, shotgun and M16.......
and i have to say they work a treat , ive got a STEYR AUG phantom on the way - should be here tomorow hopefully , will be making one of these for that too - far better than having to buy one , which can be arquad in the UK cause hardly anyone sells them +_+
great instructable, very easy to follow!
Smasher555 says: Jan 27, 2011. 8:13 PM
Hey man, can these work for a sniper rifle where the mag goes completely in the gun? If so, can you tell me how?
Hitman227 says: Dec 20, 2010. 9:00 AM
Very nice and simple.
chuck999 says: Oct 16, 2010. 1:52 PM
I know this kid and hes pretty cool
Landon Sullivan says: Dec 31, 2009. 10:31 AM
Finally, an airsoft Instructable that isn't a turd! *cough*guides*cough*

okoshima says: Jan 19, 2010. 3:16 PM
read my guide? go read it and then see the exception to the rule
Landon Sullivan says: Jan 20, 2010. 6:30 PM
Thank you for helping me prove my point.
meanbean says: Aug 19, 2010. 5:35 AM
Oh snap!
Robot Lover says: Apr 26, 2010. 9:43 AM
You Can't use the kitchen scissors, thos go in the kitchen!
okoshima says: Dec 30, 2009. 4:37 PM
lol hicaps, most airsofters use the real steel version or use a combination of zip tie, paracord and a screwdriver.

the duct tape version is long gone from use by all but new players, and rarely seen on hicaps for obvious reasons
planetmuncher (author) says: Jan 10, 2010. 10:21 PM
I got 3 hicaps from when I bought the gun, The guys at the store gave me some free stuff.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!