Introduction: Airsoft Target

Do you have no targets for your airsoft gun well you can with this one

Step 1: Meaterials

this is what you need

.a shoe box

.scissors

.and big papper

Step 2: Getting Started

If you have a shoe box that you pull the top off that's o.k just pull the top off

If you have one that folds just cut the top off

Step 3: Putting the Paper On

now draw a target on it by circles 100 in the middle 50 around the 100 20around the 50 and 10 around the 20 it should look like this.


then tape it on to the shoe box it should look like this

Step 4: FINISHED!!!!!!!!!!!!!

this is what it looks like


if the bb's go into the box there in and you don"t lose them then just take the paper off and put a new one on just the same way.

-Please leave a comment/rating/suggestion

Comments

author
ilpug (author)2011-09-27

Ok, so this instructable needs improvement. By a lot. Just so you know, my weakest gun could go through this like it wasn't even there at a range of at least 100 feet. Actually, my cheap Wal-Mart pistol might even over-penetrate this.

author
therealpanse (author)2011-08-21

well, i guess this works for some toy guns, but all of my airsoftbb would fly right through it from a distance of maybe 100 ft...

author
Flareboy323 (author)2011-04-10

At 380 FPS My AK goes through it easily. Your best bet is to use a bag of mulch or something similar to that, or like the one guy said put a sweatshirt in the shoe box. Re-usable BBs too? EPIC WIN

author
kckyller (author)2011-03-03

Just like chewy said, my gun would tear through the box no questions asked, I flattened an industrial cardboard box and used that as a target, tore straight through it lol

author
chewy3939 (author)2010-12-10

My airsoft gun (200fps) goes through this box like butter. (draw better circles) but good other than the fact you must have a wimpy gun

author
jakerox43 (author)2010-11-07

yeah, kids, don't try this at over 200 fps. or too close.

author
mr. cool 384 (author)2009-08-30

i dident even have to make this to know it sucks i 100% know that my 400 fps gun will shred a shoe box heres an idea put a sweat shirt inside the box so u dont shoot thru the box and hit a $1000 painting and distroy it

author
Gage987 (author)mr. cool 3842009-12-27

i doubt anybody that plays airsoft has one-thousand dollar paintings in their home

author
airsoftbeast40 (author)Gage9872010-04-26

i am 13 and i have 4,000 dollar paintings in my house =) but they were given to my mom when she worked in an art gallery in hawaii

author
MrHonda300 (author)2009-12-30

 My cheap Crosman C-11 shreds boxes like this.

author
titanvince16 (author)2009-08-28

I think AZNpwnage did this one already... To make this a little neater of a target, you might want to use a compass (the ones you use in math class to make circles XD) to make the target neater. Thats what i think.

author

Agreed

author
okoshima (author)2009-04-01

only good for stupidly low powered weapons, (my aug is only at 314 fps (needs work) it would shred the box with ease, you may want to state that this is for cheap guns

author

true

author
Flash Gordon (author)2009-04-10

Didnt AZNpwnage post an instructable of this already

author
h0l10W (author)2009-04-01

mine is 275fps it almost goes throught

author
Elephants Are Fat (author)2009-03-30

not to shabby

author

not to mention the fact that he did it all by himself

author

well done r u going to make any more?

author

Most Likely but I don't know what

About This Instructable

2,755views

1favorite

Bio: email me if you would like me to make your idea at tell me at lollipops81@yahoo.com
More by h0l10W:Airsoft Target
Add instructable to: