Instructables

Step 5: Fitting the adapter to the caps

Picture of fitting the adapter to the caps
I drilled a 5/8inch hole into the caps but found that the hole wasn't big enough for the expo marker so i filed it into a rough circle untill it fit VERY TIGHTLY ONTO THE EXPO MARKER. This is very important because otherwise you will beed to glue this as well.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!