Airsoft trip wire landmine

Your in a tight battle situatoin and know your going to get ambushed, so you put one of these babys down and boom!!This uses no exploseves just a spring and some pipe.

Step 1: Materials

What you'll need:
6 inches of 3/4 inch pvc pipe
3/4 inch end cap
3/4 inch 45 degree angle piece
spring (should beable to slide through pipe)
glue stick cap
little screw
nail
fishing wire
stick (to put wire)


Tools you will need:
pocket knife or drill(i didn't have one)

Comments

[Caml^Vacation]

what kinda spring is in the instructable?

[shot789]

Idk i just found it from an old airsoft gun or something

[militarymonster]

grate this rtock im maake one

[superdude00]

you mean, great this rocks i'm gonna' make one.

[HeadBanger]

Good idea, but next time when taking the photos, don't use your flash. The photos should turn out a lot better.

[shot789]

 ya i know i was using a crappy camra but i have a hd camra now

[iBurn]

 Macro is your friend...

[shot789]

who is macro?

[Ballistaman]

Macro is a mode on your camera that allows you to take photos closer with more detail. you normally push left on the d-pad. The macro symbol is a little flower.

[Fire Explorer 3]

Who is macro? LOLOLOLOL!!!

Awesome :p

[thing 2]

I saw this on youtube and wanted to post it on here but you already had it up!
I would spray paint it camo and put flour and bbs in it!

[kve23]

i made mine camo green with strips of camoflage cloth as guillie. its alot smaller and i made some mods to it.its still awesome

[thing 2]

Do you have any pics? If so I would like to see them!

[kve23]

this is it. its pretty sweet.

[thing 2]

What's the extra piece of pvc for? Is the orange bit a glue stick cap? Also what is the threading for?

Thanks,
Thing 2

[kve23]

so you can stake it to the ground and yes that is a glue stick cap but no there is no threads. i think your thinking of the spring.

[thing 2]

How do you get the glue cap to work for you without bending or poking a hole in it?

[kve23]

i put the pin all the way through and it really doesn't dent it

[Fire Explorer 3]

Hmm...tryina' figgure out how to mount this with the 45* angle, so i can use it under my gun w/o the bb's hitting my gun, or the ground, or shooting sideways...or, a way to use it as a real shotgun, but with better range... (Bigger pipe and spring, but how to quick reload...any ideas?

[shot789]

For a quick reload you can cut a small line in the pvc pipe and use a screwdriver or something to push it down. I have been meaning to post how to make a undermounted grenade launcher/ shotgun but i just havent had the time but i will soon.

[kve23]

MASTERKEY!!!!!!!!

[Fire Explorer 3]

Please do...cuz it may well become my primary... my crappy crossman crapped out on me...

[kve23]

ive gotta make 1 like that

[wawhosed]

This is a good project, I have made one before. Also, you put a s****y spring in there.

[evilgenius32]

I like how the 45 degree angle keeps the spring from coming out. I tried one like this but without the elbow and had troubles with it. This one would work a lot better.

[siv]

would the mine work for paint ball also or not

[shot789]

ya but you cant put the 45 degree angle on unless you use bigger pipe

[Thundertydus]

Mount it on your gun and add on a better handle and abolt action design, it makes a great nade launcher

[Ballistaman]

put some thin paper on the front of a pipe without the 45 degree angle when doing this. it keeps the bbs from sliding out.

[shot789]

(removed by author or community request)

[Thundertydus]

No problem, it's what i do.

[HeadBanger]

Yeah, that's a great idea. Thanks for that.

[jackas]

 sprinkler's have great springs i use them

[airsoftbeast40]

there is another instructable on this website thaty is the exact same thing and it is a little better done(meaning the product) so check it out-http://www.instructables.com/id/Build-an-Airsoft-Trip-Mine/

[Goalie1]

I just made it, and it works great!!!!

[ry25920]

 Hmmm... Airsoft under barrel shotgun?

[gregsmith55]

so u put the spring and glue cap in put the screw in and push spring down and put nail in to keep in place????  also do you jus put the bbs/flour in ontop of the spring and stuf im a lil confused

[shot789]

what u do is  put the glue cap on the spring and use a stick or something to push it down then put the nail in the whole so the spring is pushed down. then you put the bbs or whatever in it and then when the nail comes out the spring will shoot up and the bbs will come flying out.

[gregsmith55]

alrite thx

[2bad4u]

my friend and I are huge into airsoft and have thought about making this design but we can never find a spring the size we need and the power we need it to be... any suggestions...