Print PDF
Favorite
Email
Step 14The Grabber
The first photo is the beginning of the grabbers. This is two of them (i.e. one hand) pressed together. A piece of lauan runs along the grip-side of each and layers of foam glued together will form the shape.
The second photo shows the finished thing. The grabbers swivel 360 degrees and pinch together.To pinch, they slide along two aluminum tubes, so they can be positioned open, closed, or anywhere in between. Unfortunately I didn't have time to perfect the mechanics to power that (mostly I started running out of time), so I left the motors out and left them to be positioned by hand.
The second photo shows the finished thing. The grabbers swivel 360 degrees and pinch together.To pinch, they slide along two aluminum tubes, so they can be positioned open, closed, or anywhere in between. Unfortunately I didn't have time to perfect the mechanics to power that (mostly I started running out of time), so I left the motors out and left them to be positioned by hand.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
