Introduction: Alternating Blinker Circuit Made of Timer NE 555P

Here is shown, how to build an alternating blinker circuit.

Try out and enjoy!

Step 1: Materiallist & Schematics

What you need:

Power source (USB TTL Module 5V OUT)

Breadboard

Jumper Wire

Timer NE555P

Resistor 1K Ohm

Resistor 10K Ohm

2 X Resistor 220 Ohm

2 X LED

Capacitors ( 16V - 22uF/33uF/100uF/120uF/220uF/330uF/470uF/680uF/1000uF)

Plug all together as shown in schematics and test it.

Comments

author
Lectric Wizard made it! (author)2014-10-31

Schematic needs pin numbers on the IC.

About This Instructable

534views

5favorites

License:

Bio: I like to get back to the technical roots and try to make things without getting too complicated. Thanks for feedback https://www.youtube.com ...
More by bastelking:Sparebots selfmade electronic waste DIY Project Sparebots selbst gemacht aus Elektroschrott DIY Projekt Anleitung Wechselblinker Schaltung mit NE555P Timer
Add instructable to: