Introduction: Altoids Survival Kit

Picture of Altoids Survival Kit

These are the contents of my Altoids Survival Kit.

Step 1: Ranger Bands

Picture of Ranger Bands

I keep the Ranger Bands on the out side of the tin. They're can be used as fire starters, tournicettes, or just holding things together.

Step 2: The Contents

Picture of The Contents

On the top of the tin, there are two number 22 surgical blades and a match striker. The blade can be fashioned into a knife.

Step 3: Food and Water

Picture of Food and Water

From left to right, I have a fishing kit, 12 feet of 15 pound line, and three feet of snare wire. I also have a sandwich bag that holds 1 liter of water.

Step 4: Signaling and Navigation

Picture of Signaling and Navigation

From left to right, there is a whistle/compass/red light , a sheet of card paper, and the inside of a pen.

Step 5: Fire and Light

Picture of Fire and Light

For fire I have 13 matches, cotton ball and Vaseline (far right), and a fire cracker. For light I have a small LED flashlight.

Step 6: Tools and Shelter

Picture of Tools and Shelter

Tools and shelter items include: two surgical blades, part of a hacksaw blade, 15 feet of thin rope, three nails, duct tape, and a multi tool.

Step 7: First Aid

Picture of First Aid

First aid contains two butterfly closures, two medium bandaids, and two large bandaids.

Step 8:

Thats all. comment anything I should add or remove. Thanks for looking at my inscrutable!


CSI worker (author)2014-03-30


Mattakers (author)2014-03-30

Great! Add a ferrocium rod and water purification tablets and this kit will be a winner!

apk2000 (author)Mattakers2014-03-30

Thanks, I don't have water purification tablets right now and I only have a large ferro rod th wont fit.

Survivorkidjr (author)2014-03-30

Nice! But what is the hacksaw blade for

About This Instructable




More by apk2000:Exacto Blade Survival KnifeAltoids Survival KitMini Survival Pen
Add instructable to: