Print PDF
Favorite
Email
Step 3Mark Center-line for 1/8" Jacks
Scribe a line on the tin 1/4" from the bottom edge on these two sides:
- the long side opposite the hinge side (input jacks)
- one of the short sides (output jack)
These will be the center-lines for drilling the holes for the jacks.
- the long side opposite the hinge side (input jacks)
- one of the short sides (output jack)
These will be the center-lines for drilling the holes for the jacks.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
