Print PDF
Favorite
Email
Step 9Attach First Resistor to Middle Tab (Right Channel)
1) Take a resistor and attach to the middle tabs of the output jack (the one by itself) and the closest input jack (see picture).
- Make sure the resistor body is closest to the first input jack.
- solder in place
NOTE: it is very important that there are no shorts with the ground wire, case or other tabs from this point on.
- Make sure the resistor body is closest to the first input jack.
- solder in place
NOTE: it is very important that there are no shorts with the ground wire, case or other tabs from this point on.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
