Introduction: Altoids Tin

Picture of Altoids Tin

I made this out of boredom

Step 1: Grab

Picture of Grab

What you need to get 1 Altoid tin 1finger light Knife Pliers/wire cutters Duck tape And small stuff You want to put in it

Step 2: Cut the Hole

Picture of Cut the Hole

Get your knife and cut the hole the same size as the light

Step 3: Put the Light in the Hole

Picture of Put the Light in the Hole

Step 4: Duck Tape!!!!!

Picture of Duck Tape!!!!!

Put the duck tape over the light

Step 5: Decal

Picture of Decal

Decorate your tin

Step 6: Make Sure

Make sure you can reach the switch

Step 7: Now Fill

Picture of Now Fill

Fill your tin And if you don't want any rattling put spacers

Step 8: And Your Done


About This Instructable




More by spacecat02:Door CompartmentNew And Approved Altoids TinNerf Sniper
Add instructable to: