Introduction: Altoids Tin Solder Cleaning Sponge

By

it's really simple, just easy to have this.

Step 1: What You Need

altoids tin
sponge
marker
scissors
duct tape (optional)

Step 2: Fit the Sponge in the Tin

if you have the right sized sponge you don't really need to do anything.

Step 3: Mark the Back Where You Need to Cut.

Mark The Back then cut the sponge with scissors.

Step 4: That's It

its just a some sponge for cleaning your soldering tip. I had to use duct tape to help keep the tin closed, but if the sponge you use is smaller you may not need it.