Step 3: mark & drill 2 holes

Next determine center lengthwise on your 2 strips of flashing, measure 1/2" each direction and mark for drilling.These holes are for the 2 pop-rivets that will hold the strips together. I suggest drilling them together as I did, it will help insure alignment of the holes.
The best way is to clamp it down... Using gloves with drills is a big no no bec ause you glove may get caught
You could save a bunch of weight by making the supports out of two 'V's that hook together to make sort of an 'X'<br /> Let me try it in asci art:<br /> <br /> &gt;&lt;&gt;&lt;<br /> Sort of...<br /> Bend the two strips (step 2) into 'U' or 'V' shapes. Make slits 1/2 way through so they interlock. Am I making sense?<br /> <br /> Oh, here's a quick sketch:<br /> <br />
I think it would improve the whole if just the support were notched and not the can. That way more alky could be added.
This design is better!<br>Nice idea ;)
Also, in step 5 I would cut the supports 1/2 way and the can 1/2 way so that the supports sit on the bottom of the can instead of a bit above the bottom. It might add some support.<br />
To imrove on stability, could you possibly cut a slit/groove on the bottom of the pot rest to allow it a slight amount of overhang?&nbsp;&nbsp;I&nbsp;realize this would be a pain to do with the angles but if it's actually holding on &quot;around&quot;&nbsp;the lip of the altoids can it would probably be a bit more sturdy!&nbsp; Maybe 1/8&quot; or 1/4&quot; down?<br />
Look again: you can see &quot;Altoids&quot; stamped on the lid.<br /> <br /> L<br />
He was jokingly referring to a comment on my first Instructable <a href="http://www.instructables.com/id/Knife-Throwing/" rel="nofollow">Knife Throwing</a>, where someone incorrectly told me I&nbsp;had used an incorrect word to describe something. <br />
Yes but &quot;Senbon&quot;?! this kid is on another planet I think? It's a nice build, I don't see any justification for CAPS<br /> <br /> L<br />

About This Instructable


255 favorites


Bio: In my personal life I am an Traditionalist, meaning I do things 'the old way,' for example I am planning an expedition this winter or ... More »
More by die_dunkelheit: Altoids Tin Stove w/ Pot Rest Knife Throwing
Add instructable to: