Altoids Tiny Tin IPod Shuffle Case

I've seen a lot of altoids iPod cases on this site but none for the shuffle which is less common but lots of people still have it. So heres my plan for a shuffle case using an altoids tiny tin which are sort of hard to find but are useful

Step 1: Cut the Tin

Open the tin and make a square shaped hole on the side of the tin as shown. You can cut it with a dremel but I used a pair of wire cutters so it came out kind of sloppy.

Step 2: Your'e Done!

Now just put your shuffle in and thread the headphone cord out of the hole as shown. Now close it up and continue on your mery way!