Aluminium Teflon Coated Mouse Pad For Optical Mice

Step 2 Tools

-A cutting device: I used a hand grinder with a cutoff wheel attached, but you could use a jigsaw, or maybe a Dremel.
-A Metre stick, yard stick, or ruler.
-A pencil
-An old knife
-A bastard file
-Some sandpaper
-A sink with soapy water

Comments

[Mr. Thrak]

 whoahhhh.... that grinder is really dangerous
You should replace it with one that has a guard for cutoff disks. That way when the disk breaks, you won't end up with shards of hardened sand inside of you

[johnnybgood91]

why didnt you just buy a teflon sill pat that use for bakeing.

[danlab]

"sill pats" aren't teflon, they are silicone (not silicon) with fibre glass reinforcement.