Print PDF
Favorite
Email
Step 7Second Roll
Start to flare the rim for the second roll.
Use the dowel to flare the rim just like for the first roll. Then rock the cup on a flat surface just like before.
Be careful that the first fold does not coming unrolled as you start the second flare and roll. The cut edge needs to be tucked into the second roll.
Reference the second picture.
Use the dowel to flare the rim just like for the first roll. Then rock the cup on a flat surface just like before.
Be careful that the first fold does not coming unrolled as you start the second flare and roll. The cut edge needs to be tucked into the second roll.
Reference the second picture.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Nov 19, 2009. 1:43 PMmsw100
says:
Great job, you must have had plenty of practice to get to this standard
Reply
Sep 26, 2009. 2:08 AMjdc187
says:
while I love the commitment to craftmanship couldn't you just sand the upper edge smooth and role once
Reply
 |
Add Comment
|
