In this series of videos, there are (2)..... I am making an Aluminum 8 Point Buck Deer Plaque to send to my brother. The 1st casting didnt turn out so well (Video Part#1) using a technique I hadn't tried before so I decided to cast another that same day off camera, which turned out excellent. So I finish cleaning up the casting and mounting it on wood in Part#2 to send to my brother as a surprise gift! :)

If you have any questions about the process feel free to ask. Watch the videos for all the steps involved in bringing the project to completion. Please be sure and check out all my metal casting instructables I have posted. Thanks for Looking!


About This Instructable




Bio: MSFN is "Makin Sumthin from Nuthin", I suggest you do the same! Basically I take inventory of what I have laying around that most likely ... More »
More by Makin Sumthin From Nuthin:Aluminum Casting-Making Custom Wheel Center Caps JUMBO POOR MAN’s ALUMINUM CRUCIBLE - DIY $0.00 COST How to Disassemble a Large Ball Bearing and Anneal It 
Add instructable to: