Introduction: Ambient Temperature Forecasting With DHT11 and LinkitOne Board

Picture of Ambient Temperature Forecasting With DHT11 and LinkitOne Board

Today In This Instructable we are going To Check Ambient Weather Conditions with DHT11 and Mediatek LinkitOne Board..


DHT11 Temperature & Humidity Sensor features a temperature & humidity sensor
complex with a calibrated digital signal output. By using the exclusive digital-signal-acquisition technique and temperature & humidity sensing technology, it ensures high reliability and excellent long-term stability. This sensor includes a resistive-type humidity measurement component and an NTC temperature measurement component, and connects to a highperformance 8-bit microcontroller, offering excellent quality, fast response, anti-interference ability and cost-effectiveness.

Step 1: Requirements

DHT11 temperature Sensor

Mediatek LinkIt One Board

Connecting Wires

Step 2: Connections

Picture of Connections

VCC : 3V3 On Board

Out :D4 Pin on Board

GND: Ground on Board

Step 3: The Coding Part...

Picture of The Coding Part...

I have uploaded the Code.....And Now You Have successfully Interfaced it with the Mediatek LinkitOne Board...

Thanks For watching..

Comments

seamster (author)2015-12-21

Nicely done, thanks for sharing!

About This Instructable

390views

5favorites

License:

More by Raj1177:Ambient Temperature Forecasting With DHT11 and LinkitOne BoardAltitude,Pressure and Temperature Measurement with BMP180 and LinkitOne Board
Add instructable to: