Introduction: American Forest Ornament

This instructable will show you how to 3D print and assemble your very own American Forest Ornament for your Christmas tree!

Step 1: Print the Bottom Layer of the Ornament

Download the ornament bottom layer stl file. Scale the file up from millimeters to inches and print it with supports. Remove supports from the part.

Step 2: Print the Middle Layer of the Ornament

Download the ornament middle layer stl file. Scale the file up from millimeters to inches and print it.

Step 3: Print the Top Layer of the Ornament

Download the ornament top layer stl file. Scale the file up from millimeters to inches and print it.

Step 4: Assemble the Layers Together to Complete the Ornament

After all three layers have printed, slide the middle layer print onto the bottom layer print. Then slide the top layer print onto the middle layer print. The parts should all stay together with friction but for extra hold/permanence you can add a small amount of super glue between the layers. After that, all that's left is to tie on some string and hang your new ornament up on the tree!

Comments

author
h00k3rb00tz (author)2014-11-11

This is awesome
Better be in the top 20! Nice to see ornaments that are actually printable and not just "concept art".

author
josephgregorydelong (author)2014-11-11

Your ornament is amazing!

author
otakuotaku (author)2014-11-11

WOWWY DATS AMAAAZZIINNGGG. I wrikkkkkkk da raindeeerrr.

author
Porda (author)2014-11-11

Awesome ornament! The layers look great and even reduce the support material needed. All around fantastic.