loading
Picture of Amigurumi Adventure Time Jake
100_1522.JPG
100_1524.JPG
100_1525.JPG
100_1523.JPG
FinnJake.jpg
Jake the dog is from the cartoon adventure time. I created this pattern because I wanted a Jake toy and could not find a free pattern online.
Final body measurement is 6 inches tall and 4 inches wide plus long 5 inch legs.

Supplies:
Golden yarn http://www.lionbrand.com/6030/PictPage/1922241078.html
White yarn http://www.lionbrand.com/6030/PictPage/1922241086.html
Black yarn http://www.lionbrand.com/6030/PictPage/1922241082.html
5.50 mm hook
Needle
Scissors
polyester fiberfill stuffing
 
Remove these adsRemove these ads by Signing Up

Step 1: Body

Picture of Body
Body (golden yarn):
R1: 6 SC into ring (6 SC)
R2: 2-SC INC around (12 SC)
R3: *SC 1, 2-SC INC into next SC * around. (18 SC)
R4: * SC 2, 2- SC INC into next SC * around. (24 SC)
R5: * SC 3, 2- SC INC into next SC * around. (30 SC)
R6: * SC 4, 2- SC INC into next SC * around. (36 SC)
R7: * SC 5, 2- SC INC into next SC * around. (42 SC)
R8: *SC 6, 2-SC INC into next SC * around. (48 SC)
R9-34: 1 SC in each SC around. (48 SC)
R35: *SC 6, 2-DEC into next SC * around. (42 SC)
R36: *SC 5, 2-DEC into next SC * around. (36 SC)
R37: *SC 4, 2-DEC into next SC * around. (30 SC)
Stuff with polyester filling.
R38: *SC 3, 2-DEC into next SC * around. (24 SC)
R39: *SC 2, 2-DEC into next SC * around. (18 SC)
R40: *SC 1, 2-DEC into next SC * around. (12 SC)
R41: *2-DEC into next SC * around. (6 SC)
Sew closed. Fasten off. Leave a long tail for attaching. Stuff with polyester filling. Set aside.

Step 2: Legs, ears and tail

Picture of legs, ears and tail
100_1510.JPG
100_1511.JPG
Legs x4 (Golden yarn):
R1: 4 SC into ring (4 SC)
R2: 2-SC INC around (8 SC)
R3-33: 1 SC in each SC around. (8 SC)
Fasten off. Leave a long tail for attaching. Stuff with polyester filling. Set aside.

Ears x2 (golden yarn):
R1: 6 SC into ring (6 SC)
R2: 2-SC INC around (12 SC)
R3-9: 1 SC in each SC around. (12 SC)
Fasten off. Leave a long tail for attaching. Set aside.

Tail (Golden yarn):
R1: 4 SC into ring (4 SC)
R2: 2-SC INC around (8 SC)
R3-13: 1 SC in each SC around. (8 SC)
Fasten off. Leave a long tail for attaching. Stuff with polyester filling. Set aside.

Step 3: Face

Picture of Face
100_1512.JPG
100_1509.JPG
Nose (Black yarn):
R1: 3 SC into ring (3 SC)
R2: *SC 1, 2-SC INC into next SC * around. (6 SC)
R3: * SC 2, 2- SC INC into next SC * around. (9 SC)
R4: * SC 3, 2- SC INC into next SC * around. (12 SC)

Eyes x2 (Black and white yarn):
With white yarn
R1: 3 SC into ring (3 SC)
R2: *SC 1, 2-SC INC into next SC * around. (6 SC)
R3: * SC 2, 2- SC INC into next SC * around. (9 SC)
R4: * SC 3, 2- SC INC into next SC * around. (12 SC)
R5: * SC 4, 2- SC INC into next SC * around. (15 SC)
Switch to Black yarn
R6: 1 SC in each SC around. (15 SC)
Fasten off. Leave a long tail for attaching. Set aside.

Jowls (golden yarn):
R1: 3 SC into ring (3 SC)
R2: *SC 1, 2-SC INC into next SC * around. (6 SC)
R3: * SC 2, 2- SC INC into next SC * around. (9 SC)
R4-22: 1 SC in each SC around. (9 SC)
Stuff with polyester filling.
R23: *SC 2, 2-DEC into next SC * around. (6 SC)
R24: *SC 1, 2-DEC into next SC * around. (3 SC)
Sew closed. Fasten off. Leave a long tail for attaching. Stuff with polyester filling. Set aside.

Step 4: Assembly

Assembly:
Using the long tail left for attaching sew the tail to the bottom back of the body. Sew the ears to the top sides of the body. Directly below the ears sew on 2 of the legs. At the bottom below the top legs sew on the other 2 legs. Curve the jowls and sew on to the top half of the body. Sew the eyes above the jowls and stuff slightly. Sew nose on the center of the jowls and use the leftover yarn from the nose to make the mouth.
new show that needs funding its made by frederator and Cartoon Hangover http://www.kickstarter.com/projects/frederator/bee-and-puppycat-the-series?ref=category
I got through to R9-34 and finished with 48 SC. then when I go to R35 I get way over 42 stitches, somewhere in the 50's . What am I doing wrong?!?
sbautista72 years ago
Hi!! This is amazing and easy to make. I hope you can show us how to make Finn. Really thank you!!
mjavier42 years ago
AMAZING! My daughter will love this! :)
Would you be posting free pattern for Finn too?
Thanks.
moovet3 years ago
Slamacow, this is lumpin' awesome
Nahual3 years ago
:O excellent!!!
Revolt Lab3 years ago
So much yes.
Mauigerbil3 years ago
Very nice work! I love Adventure time!!!!
Ez-Kabob3 years ago
That's extremely fabulous!!!!!!!